Author Topic: Alamo AZ Mule Deer Tournament 2021  (Read 1736 times)

0 Members and 1 Guest are viewing this topic.

Offline Tweeder

  • AZCA Members
  • Member
  • *
  • Posts: 410
Re: Alamo AZ Mule Deer Tournament 2021
« Reply #10 on: March 09, 2021, 01:39 PM »
Nice work guys, way to represent!

Offline Stevert

  • AZCA Members
  • Member
  • *
  • Posts: 902
Re: Alamo AZ Mule Deer Tournament 2021
« Reply #11 on: March 09, 2021, 02:26 PM »
Nice work Captain Dave and Tommy.  Way to MVP it Timbo!!!

Offline sparkchaser

  • Administrator
  • Member
  • *****
  • Posts: 1860
Re: Alamo AZ Mule Deer Tournament 2021
« Reply #12 on: March 13, 2021, 07:55 AM »
I ended up ordering a used trim assembly from ebay. It's a good thing I did as you can see what I found when I pulled the shock rod out. No parts like that on the IPC. It must have bounced really hard on the way to the lake.
SEA.....HAWKS....

Offline craigm

  • AZCA Members
  • Member
  • *
  • Posts: 357
Re: Alamo AZ Mule Deer Tournament 2021
« Reply #13 on: March 13, 2021, 08:59 AM »
did you have a transom support on or was the motor just resting on the trim ?

Offline Fishless

  • AZCA Members
  • Member
  • *
  • Posts: 4204
Re: Alamo AZ Mule Deer Tournament 2021
« Reply #14 on: March 13, 2021, 03:58 PM »
Geez Dave looks like a bomb went off inside of that hydraulic ram :o Those two dips just north of Wendon have almost got me a couple times the one is mellow to drive thru the other one you hit that to fast and you can go airborne.
« Last Edit: March 13, 2021, 04:02 PM by Fishless »
"I won't be wronged, I won't be insulted, and I won't be laid a hand on. I don't do these things to other people and I expect the same from them." John Bernard Books

Offline sparkchaser

  • Administrator
  • Member
  • *****
  • Posts: 1860
Re: Alamo AZ Mule Deer Tournament 2021
« Reply #15 on: March 13, 2021, 05:11 PM »
did you have a transom support on or was the motor just resting on the trim ?

I did have a transom saver on. When we got to the lake it was still attached to the engine, but was not on the trailer roller
SEA.....HAWKS....