Author Topic: Jig Maker  (Read 1167 times)

0 Members and 1 Guest are viewing this topic.

Offline PhishingPhreek

  • Administrator
  • Member
  • *****
  • Posts: 1331
Re: Jig Maker
« Reply #10 on: March 27, 2022, 05:55 PM »
Thanks Hutch, looking for 1/16-1/4 oz. I
Looks like you're having the same issue several members are having with partial messages coming through. What device are you using to post? Phone/tablet or a PC?

Offline Hutch

  • New Member
  • Posts: 6
Re: Jig Maker
« Reply #11 on: March 28, 2022, 12:36 PM »
Well big brother said he did not have that mold. And it would cost a bunch money to have one made. And that would only be for one weigh. He also said it would be very labor intense due to the 3 hooks. Sorry couldn’t help Hutch
« Last Edit: March 28, 2022, 12:39 PM by Hutch »

Offline Rollo

  • AZCA Members
  • Jr. Member
  • *
  • Posts: 17
Re: Jig Maker
« Reply #12 on: March 29, 2022, 07:48 PM »
Thanks Hutch, looking for 1/16-1/4 oz. I
Looks like you're having the same issue several members are having with partial messages coming through. What device are you using to post? Phone/tablet or a PC?

The last message was on an IPad, my first message on this thread was on an IPhone and it got cut off too

Offline Rollo

  • AZCA Members
  • Jr. Member
  • *
  • Posts: 17
Re: Jig Maker
« Reply #13 on: March 29, 2022, 07:50 PM »
Hutch,,

Thanks for asking the question!

James

Offline PhishingPhreek

  • Administrator
  • Member
  • *****
  • Posts: 1331
Re: Jig Maker
« Reply #14 on: March 30, 2022, 01:28 AM »
The last message was on an IPad, my first message on this thread was on an IPhone and it got cut off too

We've had 4 other visitors say they've had problems and it's all been with an Apple device. I think you're the first one to mention a tablet though. Do you know if you were using Safari, Chrome, or Firefox?

Sorry for all the questions, I'm just trying to figure out what's going on here.

Offline Hutch

  • New Member
  • Posts: 6
Re: Jig Maker
« Reply #15 on: March 30, 2022, 04:53 PM »
I

Offline Hutch

  • New Member
  • Posts: 6
Re: Jig Maker
« Reply #16 on: March 30, 2022, 05:00 PM »
Well I replied and didn

Offline Hutch

  • New Member
  • Posts: 6
Re: Jig Maker
« Reply #17 on: March 30, 2022, 05:01 PM »
I

Offline OneBlade

  • Administrator
  • Member
  • *****
  • Posts: 3014
  • San Carlos Crappie
Re: Jig Maker
« Reply #18 on: March 30, 2022, 05:13 PM »
Sorry Hutch, it looks like you're seeing the bug our website has with truncating replies.  We are looking into the issue trying to figure out the cause.

Offline PhishingPhreek

  • Administrator
  • Member
  • *****
  • Posts: 1331
Re: Jig Maker
« Reply #19 on: March 30, 2022, 05:34 PM »
Sorry Hutch, it looks like you're seeing the bug our website has with truncating replies.  We are looking into the issue trying to figure out the cause.

He knows, see my last message in this thread. I think he was trying to help me with his replies.